LP-ABR10 Firmware Detailed Version-Up Information

The following points have been upgraded.

• Added a function to read multiple symbols of the same data content at the same time.
• Added a function to notify that the partition has been damaged.

The following points have been upgraded.

[Improvement points]

• Modified the default setting of decode timeout ”DECODELIM” 500[ms]→1000[ms].
• Modified not to select “Image Filter - Image Size” in auto tuning.
• Optimized the reading parameter of decoder for the improvement of reading damaged symbol.

[Failure correcting points]

• Corrected the error occurred when “CHCBCR” command that outputs the reader information (contrast information, decode information, quality information), is valid that had returned 0 fixed as an output of the contrast information.
• Corrected the error in “ROTATE” command that rotates the screen 180° is valid that the target angle of view cannot be trimmed.
• Corrected the error that DataMatrix of vertical 8 cell rectangle cannot be read at the default setting.
• Corrected the error that the illumination does not turn off when ”CAMbrightness” command is 0 in brightness setting of LP-ABR12.
• Corrected the error in print quality output is valid that the print quality of Micro QR does not output.